Manufacturers from three aspects of analysis of heat transfer vinyl color layer and sub separation
Manufacturers from three aspects of analysis of heat transfer vinyl color layer and sub separation.
Heat transfer vinyl chromatographic separation and sub refers to the heat transfer vinyl after hot stamping to tear away from the PET film, sometimes find heat transfer vinyl color layer and rubber separation, leading to poor hot stamping effect.
But heat transfer vinyl problems should be from the three elements of hot stamping, to tear away from the way, these three aspects of the product itself.
Exception: A, hot stamping temperature and time heat transfer vinyl products currently design stamping temperature is 150 -
Time for 10-160 degrees, hot stamping
6 to 12 seconds, pressure
If hot stamping time is too long, the temperature too high are prone to hot melt glue line coking, lead to lose caking hot melt adhesive, which respectively and chromatographic separation;
B, to tear away from the way the reason: sen the sunrise heat transfer vinyl heat transfer vinyl factory products are designed for cold tear, above 8 minutes after hot stamping is required to tear off;
If with the method of hot tearing, easy to cause the rubber and the color layer in curing state separation;
C, the product itself problem: the product in the process of production, color layer without baking in place or cure time is not enough also easy to appear similar problem;
In addition, the material also can appear this phenomenon.
All in all, thermal transfer thermal transfer problems or group of o solution, more heat transfer vinyl information can log in, the sunrise heat transfer vinyl heat transfer vinyl factory site or call 15359509866 (
WeChat with Numbers)
Sen the sunrise heat transfer vinyl factory customer service sincerely service for you!