We have sunken modelling of heat transfer vinyl.
Want to know about thermal transfer thermal transfer vinyl look here, this machine is composed of four layer, were base layer, mold, printing layer, glue layer.
Small make up to share part of the heat transfer heat transfer vinyl, hope everyone at the time of application of heat transfer vinyl to the reasonable application of heat transfer vinyl.
Base layer: thermal transfer film, thermal transfer film including PET film, OPP film, PVC film, etc. , need according to the need of mold materials to choose the appropriate basement membrane layer: is the coating a layer of mold release agent, remain solid at room temperature, in a certain temperature will melt, and the integration of base layer.
Printing layer: the printing ink above the layer should be brushed into a fine pattern of glue layer: to deeply understand, glue coverage on the printing layer, so that the iron can refer to glue on the bearing iron content.
Heat transfer at the end of the production test, tensile test, brightness test, wash water, etc. , special material require different test, to ensure the product quality standard.
Thermal transfer film finished product should have excellent tensile, rebound, weather resistance and water resistance;
The characteristics of the operation is simple, fast and convenient.
Different thermal transfer film should have different heat transfer requirements.
Attention should be paid to turn very hot temperature, hot stamping pressure, hot stamping speed and so on.
When buy this machine should be referred to the salesperson ask these questions, in order to avoid the thermal transfer failure behind.
If you have any questions about this machine want to consultation can log in, the sunrise heat transfer vinyl heat transfer vinyl factory site or call 15359509866 (
WeChat with Numbers)
Sen the sunrise heat transfer vinyl factory customer service will serve you wholeheartedly!
More machine information in control!